As long as the RV sewer hoses are 3 inch in diameter without a bayonet fitting like Camco part # CAM39611 the hoses will slide over each end of the coupler part # CAM39203 to join them together. You do not need to heat the coupler up to seal the connection. view full answer...
The Gustafson RV Vanity Light part # 277-000325 can be used with ether incandescent bulbs or LEDs. It does not come with bulbs so if you want to use LEDs then just order the LED Light Bulbs part # DI68VR. view full answer...
The only entry door latches we offer are the Global Link RV Entry Door Locking Latch Kits which are available in chrome part # 295-000002, white part # 295-000021, and black part # 295-000019. These door latches will all install in a cutout from 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. Therefore, in order to make either option work you may need to modify your cutout to accommodate this range but we do not offer any other options. That said, I really do not think you will be able... view full answer...
If you're just wanting to replace the rooftop unit and keep the rest of the equipment that you currently have then you'll just want to see how it connects to the controller. It can have a 6-pin connector, 9pin connector, or be hardwired in. If you have 6-pin connector then you can go with the Furrion # FR26PR. For a 9-pin connector you'll need part # FR82PV to get a wire harness adapter. If the unit is hardwired you'll need to reach out to Furrion and the manufacturer of the current AC... view full answer...
Most likely yes, etrailer Landing Gear Set # RVLG-8000 will fit your 1994 Avion Fleetwood 5th wheel trailer. You will want to measure the distance between the bracket stops on the sides of the outer tubes of your existing landing gear to make sure it is a match. I have included a picture showing these measurements.
The 15-1/2 inches is the distance between the upper and lower stops. The 17-1/2 measure is the distance from the top of the upper stop to the bottom of the lower stop. I have... view full answer...
When measuring the height of a motorhome to pick out a cover for it the key is to measure from the bottom of the body to the top not including the ladder or any roof top accessories. If you check out the picture I attached you'll see what I mean. I looked up your 1995 Winnebago Itasca Passage and it measures 11 feet from the ground to the top of the AC unit so a cover like the part # 290-64823 will fit the body of the motorhome well it's height is 9.5 feet basically. view full answer...
Go To Results